Wireline Brush
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
I. Introduction
A wireline brush is used to brush away the dirt, paraffin and filling rock waste on the tubing string and connectors before the downhole device is lowered in the well.
II. General Technical Parameters
OD of body | Fishing neck | Connection | Length | PN |
1.5" | 1.375" | 15/16UN | 2ft | W23-01.00 |
1.875" | 1.75" | 1-1/16UN | 2ft | W23-02.00 |
2.5" | 2.313" | 1-1/16UN | 2ft | W23-08.00 |
4" | 2.313" | 1-1/16UN | 2ft | W23-09.00 |
Note. More customized parts are available upon request.
III. Structural features
Some holes are drilled on the weight bar of wireline brush evenly and rotationally, and then the wireline is fixed with headless screws. The wireline stretching out of the body is incompact more convenient for brushing away sundries.
The wireline brush is connected with the bottom of basic tool string for use.
- Tubing Swage 1 Pieces / (Min. Order)
- Tubing Broach 1 Pieces / (Min. Order)
- Tubing End Locator 1 Pieces / (Min. Order)
- Sand Pump Bailer 1 Pieces / (Min. Order)
- Guide Type Scraper 1 Pieces / (Min. Order)