Tubing Broach
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
I. Introduction
A wireline tubing broach is a hardened tempered cutting tool ued to broach out restrictions of whatever nature in the wellbore.
II. General Technical Parameters
OD | Fishing neck | Connection | PN |
1.25"-1.5" | 1.187" | 15/16-10UN | W21-03.**.00 |
1.5"-2" | 1.375" | 15/16-10UN | W21-03.**.00 |
2"-2.5" | 1.375" | 15/16-10UN | W21-03.**.00 |
2.5"-3" | 1.75" | 1-1/16-10UN | W21-03.**.00 |
3"-4" | 1.75" | 1-1/16-10UN | W21-03.**.00 |
4"-5" | 2.313" | 1-9/16-10UN | W21-03.**.00 |
Note:More customized parts are available upon request.
III. Structural features
The tubing broach is composed of the body, scraper and pressing cap, in which, the pressing cap and body are supported with nail after being connected.
There are some gas vents on the body to discharge gas or liquid so as to prevent any end from shutting off pressure to cause difficult use or accidents.
The scraper is tapered whose both ends are small and middle is large. The hardness of blade reaches 47~52HRC after full quenching and tempering. The scraper can jar downward and upward.
- Wireline Brush 1 Pieces / (Min. Order)
- Tubing Swage 1 Pieces / (Min. Order)
- Tubing End Locator 1 Pieces / (Min. Order)
- Sand Pump Bailer 1 Pieces / (Min. Order)
- Guide Type Scraper 1 Pieces / (Min. Order)